Description
APPLICATION AREAS TEROSON PU 6700 is used in the automotive industry and in motor vehicle body repair shops mainly for bonding plastic parts (e.g. customising body parts) as well as metal parts.
The parts to be bonded must be free from oil, grease, moisture, dirt and release agents. Metals may either be primed (e.g. cathodic EC) or they should be grinded. Finally the sanded parts should be cleaned with Isopropyl Alcohol.
Insert the cartridge into a suitable application gun. Apply pressure to the cartridge(s) to ensure a simultaneous and homogeneous flow of both components. Thereafter, attach the static mixer and cut the tip to provide for the desired bead size. Discard the first 2 cm of extruded adhesive bead. TEROSON PU 6700 is applied directly to the substrates. Any excess material should be removed immediately after application. If material is left in the cartridge leave the static mixer attached. For further use of the product, simply remove the mixer and install a new one.
Curing occurs at room temperature. To get a faster grindability the parts bonded with TEROSON PU 6700 can be warmed up to 60 to 70 °C for minimum 15 minutes.
